Layout study
Infeed and discharge flows, available floor space,
utilities, and connections to existing equipment.
COMPLETE BOTTLING LINE
From container handling to final packaging, we design
integrated solutions around your product, container format
and production requirements.

Italian engineering
for bottling
lines installed
worldwide*
A coordinated process flow. Technologies selected for your application.
A COMPLETE SYSTEM, ENGINEERED AS ONE
An efficient line starts with a thorough analysis of the product, containers, and actual operating conditions. Ferrero Machines integrates bottling and packaging operations into a coherent project, with interfaces and material flows defined for the production facility.
The line configuration is developed around the required output, available floor space, and desired level of automation. Each scope of supply is project-specific: components, technologies, and performance are confirmed during the engineering study.
One technical point of contact
From the initial consultation through line commissioning.
Process integration
Machines and conveyors coordinated throughout the process flow.
THE PRODUCTION FLOW
An illustrative sequence configured around the container,
product, closure, and production targets.
Glass handling takes into account gentle container handling, container treatment,
and a closure system compatible with the product.
Illustrative process diagram. The inclusion and technology of each station are determined by the application and approved configuration.
The PET process may include blow molding and air conveying,
with integration defined according to production requirements and available floor space.
Illustrative process diagram. The inclusion and technology of each station are determined by the application and approved configuration.
The can line sequence and seaming requirements must be verified
against the container, product, and application specifications.
Illustrative process diagram. The inclusion and technology of each station are determined by the application and approved configuration.
This application must be assessed case by case: handling, filling, and closing
depend on the container format, product, and required cycle.
Illustrative process diagram. The inclusion and technology of each station are determined by the application and approved configuration.
THE CONFIGURATION FOLLOWS THE CONTAINER
Glass, PET, and cans may require different line architectures and technologies. Drums and metal containers are assessed according to the product and planned handling method.
01 / GLASS
Container conveying and orientation,
rinsing where required, and filling and
capping configured for the product,
format, and closure.
WINE · BEER · BEVERAGE
02 / PET
From blow molding and air conveying,
where included, through filling,
capping, and packaging, configured
to suit the layout.
WATER · JUICES · CSD
03 / CANS
Can feeding and conveying, filling,
and closing technologies are selected
according to the beverage, can material,
and manufacturer’s specifications.
BEVERAGE · FOOD
04 / METAL DRUMS
A potential application to be assessed
case by case, based on container
capacity, product, filling cycle, and
handling requirements.
DEDICATED ENGINEERING STUDY
INTEGRATED TECHNOLOGIES
Filling, closing, and packaging technologies are selected
according to product characteristics and required operating conditions.
01 / CONTAINER TREATMENT
Depalletizing, infeed, conveyors, container orientation,
and handling configured for the facility’s process flow and layout.
02 / FILLING
Gravity, vacuum, volumetric, pressure, or isobaric filling:
the choice depends on the product, container, and process conditions.
03 / CLOSING
Capping or closing configured for the container and specified closure.
Can seaming is defined according to the application requirements.
04 / INSPECTION
Labeling, coding, and in-line inspection can be integrated
to meet traceability and quality control requirements.
05 / PACKAGING
Product collation, case or film packaging, and discharge flow handling,
with solutions selected for the market and sales format.
06 / END OF LINE
Conveying, accumulation, and palletizing, performed manually
or automatically according to the required level of automation.
THE PROJECT, STAGE BY STAGE
A structured process helps clearly define the scope of supply, interfaces, and responsibilities.
01
Product, container, closure, required capacity,
shifts, and production targets.
02
Infeed and discharge flows, available floor space,
utilities, and connections to existing equipment.
03
Selection of technologies, machines,
and interfaces included in the scope of supply.
04
Coordination, commissioning, and support
as defined in the agreed project.
INFORMATION FOR AN INITIAL REVIEW
Share the key details of your process so our engineering team
can assess the application and define the next steps.
Product
Product type, viscosity, carbonation,
and process conditions.
Closing and packaging
Cap or closure type and
required sales configuration.
Level of automation
Manual or automated operations and integration goals.
Container and format
Material, geometry, capacity, and
range of container sizes to be handled.
Production rate and facility
Target output, shifts, available floor space, utilities,
and existing interfaces.
Destination
Installation country, applicable requirements,
and indicative schedule.
P.IVA IT 01088770050
Copyrights © 2026 tutti i diritti riservati